SET-01 |
A work already in progress. A wrought copper sculpture nearing
completion. Forming, fitting and assembling the third section of this
piece. |
SET-02 |
Continuing work on the copper piece. Fit up and welding.
Planishing over stakes. |
SET-03 |
Some forming stakes and backing tools needed for this work. Applying
a patina to the completed piece. |
SET-04 |
Reshaping a copper form previously done. This will be transformed into
a new piece of sculpture. |
SET-05 |
Continued work on the transformed copper piece. Raising a boss,
making small cones etc. |
SET-06 |
Making a base, adding details and finishing this piece of sculpture. |
SET-07 |
Creating a new copper piece right from the beginning. A
recapitulation of the previous information offered. |
SET-08 |
Making some pitch, then using pneumatic tools for some planishing and
chasing operations. |
SET-09 |
Edge definition, hammering out a valley curve and rolling over the rim
are some of the techniques shown. |
SET-10 |
Texturing a new sheet using pneumatic power tools. Hot forging
the copper. |
|
This series is temporarily suspended for a while until I catch
up on some other more pressing matters. Like making a living
for instance. I'll resume work on the current piece and will
post the process as soon as I can get back to it.
Chris |
|
|
